Five operations, one cycle
Deburring, descaling, oxide removal, polishing and brightening are completed together in a single automated cycle.
Magnetic Polishing & Deburring Machines
Eliminate Manual Finishing.Achieve Consistent, Production-Ready Surface Finishes.
Authorised distributor of magnetic polishing and deburring machines for India and the GCC. Deburr, descale, remove oxide and polish small metal parts in one automated cycle — reaching blind holes, internal threads and recesses without changing dimensions.
Proven Surface Finishing ProcessLive Sample TestingConsumables SupportTechnical After Sales Support
We run these machines in our own plant — we sell what we use.
Riesen Engineering polished parts by hand before it sold these machines. Three operators finished 300–400 kg a day at an inconsistent quality. The same work now runs on one production machine at 700 kg a day with a single operator.
Running Cost, From Our Own Floor
The Cost Argument
These are our own plant figures, not manufacturer claims — the cost per kilogram of material processed, manual polishing versus one production machine.
| Per kg | Manual polishing | Production machine |
|---|---|---|
| Chemical | ₹7.50 | ₹5.00 |
| Labour | ₹6.60 | ₹1.10 |
| Power | — | ₹0.36 |
| Pins | — | ₹0.37 |
| Total | ₹14.10 | ₹6.83 |
Roughly ₹6–7 per kilogram, against about ₹14 per kilogram by hand. This applies to production-volume machines; entry-level machines are chosen to replace outsourcing, not labour.
The Process
One Cycle. Five Operations.
A single automated cycle deburrs, descales, removes oxide, polishes and brightens the part. Where belts and vibratory media cannot make contact, the pins do — and because the abrasion is carried by the media rather than the component, the part leaves the machine dimensionally as it entered.
Reaches enclosed geometry
Thousands of small stainless pins follow a rotating magnetic field and reach blind holes, internal threads, slots, recesses and the interiors of drawn parts.
Dimensions unaffected
The pins carry the abrasion, not the part, so dimensions and tolerances are held through the cycle.
Materials handled
Stainless steel, brass, copper, aluminium, zinc and die-cast alloys, spring steel and titanium.
Machine Range
Three Machine Families
Single Bucket Series
Entry level. Job shops, sample runs, jewellery and giftware.
Compact. The smaller models run on a normal single-phase supply and occupy under half a square metre.
Get a Quote
Magnetic Levitation Series
Production volumes. Fasteners, turned parts, sheet metal, CNC job shops.
The volume workhorse — up to around 700 kg per eight-hour shift with one operator.
Get a Quote
Fully Automatic Series
High volume, where manual loading is the bottleneck.
Hopper-fed and self-discharging. The operator only washes and dries the finished parts.
Get a QuoteWe also supply sheet-metal deburring and drawing machines for all sheet metals, including mild steel. Talk to us.
What You Get
Why Riesen Engineering
Process knowledge, supplied with the machine
Media, compound concentration, cycle time and speed matched to your part geometry.
Own-plant operating data
Our cost and output figures come from running the same machines on our own floor.
Free trial processing
Send your sample parts, we process them and courier them back.
Machines held in stock
Stock is held at Faridabad for immediate delivery.
Ongoing consumables supply
Continuous supply of polishing pins, which are not available in the local market.
ISO 9001:2015 · CE